Setting up a Brick Paver Walkway or Red Wall Bricks

Using Installing a Brick Paver Walkway or Decorative Brick Blocks or Pavers to develop a sidewalk or patio matches a house in a manner in which is unmatched. It includes a level of quality and beauty to a home entrance that can not be accomplished with either concrete or asphalt. Brick and Pavers likewise are available in various colors and shapes allowing for distinct color pattern and patterns to be attained. In addition, installing a Brick or Paver walkway does not always need a pro. With some standard knowledge and a relatively easy sidewalk plan, a property owner is capable of undertaking such a project.

The key to installing a Brick or Paver Walkway is to first effectively prepare the location where the bricks/pavers are to be installed. The area ought to be removed at least a foot down, removing all topsoil and clay soil. In addition, string lines need to be strung on each side of the walkway. The string lines show the completed height of the pathway.
When the location has been dug down, 3/4" gravel stone need to be laid in and tamped down firmly. The height in between the tamped down sand and the stringline ought to equate to the thickness of the brick or paver.

Now that you have a steady base, place a 1" pipe or ledger board the length of the sidewalk on either side of the walkway. Utilizing a flatedge, e.g. a 2"x4" board, slide it over the 2 lengths of the pipe/ledger board. In doing this you will create a level area to lay the bricks/pavers.

Now put on the level sand/stone dust strips of plastic brick borders. Set up a work on both sides of the prepared location. These strips will function as your walkway border and aid to maintain the integrity and shape of the pathway. You can get these plastic strip borders check here at most home enhancement shops. The strips ought to be anchored down with 12" galvinized nails. You must sink these nails into the ground and through the strips every foot.

The secret to laying the bricks/pavers is to ensure that they interlock with each other. Always stagger adjacent rows of bricks by 1/2 of a brick to interlock them. This will again help preserve the integrity of the walkway.

Inevitably bricks/pavers will require to be cut or divided when developing the walkway. To in fact cut/split the brick/paver, lay it in a bed of sand and location the chisel at a 75 degree angle over the spot where you want to break the brick. If your sidewalk has curves you will require to buy/rent a wetsaw.

After installing the bricks, build up the outdoors edges with additional sand, and then shovel in the topsoil and load down strongly.
Finally, spread stone dust over the new sidewalk and sweep into the cracks. Repeat this procedure a couple of times to ensure the fractures are fully filled. This will finish the interlocking of the bricks and help to eliminate any weed development. Just include lawn seed to the outdoors edges and you must have a lovely entryway to your home within a number of weeks.


In addition, installing a Brick or Paver walkway does not necessarily need a pro. The secret to installing a Brick or Paver Walkway is to very first properly prepare the area where the bricks/pavers are to be set up. Now that you have a steady base, place a 1" pipeline or ledger board the length of the walkway on either side of the pathway. These strips will act as your walkway border and assistance to preserve the integrity and shape of the pathway. Undoubtedly bricks/pavers will require to be cut or divided when developing the walkway.

Leave a Reply

Your email address will not be published. Required fields are marked *